background image

03

04

The ambient light sensor will automatically turn on the laser light in 
dark/night environments and turn it off in bright/sunlit environ-
ments. 
Please Note: The laser light will not turn on/off automatically if it was 
turned off the previous time using the control button. 

There are 10 different light modes and these can be changed by 
pressing the control button on the back of the laser light. 
The sequence of the modes is as follows:

OPERATING THE CONTROL BUTTON:

Green Christmas trees & red dots moving
Green Christmas trees & red dots stationary
Green Christmas trees & red dots flashing
Red dots moving
Red dots stationary
Red dots flashing
Green Christmas trees moving
Green Christmas trees stationary
Green Christmas trees flashing
Cycle (cycles through all the modes)

BUILT-IN AMBIENT LIGHT SENSOR

BUILT- IN TIMER FUNCTION: 

The garden laser light has a built-in default timer. The light is 
designed to shut off after 6 hours of operation in the dark and wake 
again after 18 hours on a continuous cycle. 
Please Note: The timer function will override the ambient light func-
tion once it becomes active. 

Turning off the laser light – Press and hold the control button for 3 
seconds.

6 hours in dark

18 hours

ON

OFF

1
2

4
5

7
8

10

3

6

9

CAUTION & WARNINGS:

Please read through the instruction manual before use.
Do not use seasonal products outdoors unless marked suitable for 
indoor and outdoor use. When products are used in outdoor 
applications, connect the product to a Ground Fault Circuit Inter-
rupting (GFCI) outlet. If one is not installed, please contact a quali-
fied electrician for proper installation.
This seasonal-use product is not intended for permanent installa-
tion or use.
Do not secure the product's electric cord with staples or nails, or 
place it on nails or sharp hooks. 
Do not place large objects such as floor lamps, tables, or chairs on 
the product's electric cord. 
Do not hang ornaments or any other objects from the product's 
electric cord. 
Do not close doors or windows on the product's electric cord as 
this may damage the wire insulation. 
Do not keep the product plugged in when left unattended (such as 
when leaving home or when asleep). 
Do not cover the product with cloth, paper or any material not part 
of the product when in use.
DO NOT use the product if damaged. The laser light head, electric 
cord and plug must not be damaged in any way prior to use.  
This product is not a toy. Please keep it out of the reach of children 
and pets.

Close supervision is necessary when product is in use near children 
or dependents. 
Garden Laser Light is a class IIIa laser product. Do not stare into the 
laser beams or view directly with optical instruments.
Avoid direct eye exposure.
Keep at least 1 meter (approximately 3 feet) distance between the 
product and flammable materials.

Summary of Contents for OUS00-0817






Reviews: