background image

05

06

Ingress protection: IP65. Can protect against rainy days but DO NOT 
submerge directly in water. 
Turn off the power before installation or maintenance.
Use this product only for the intended use as described in these 
instructions. Disconnect this product from power immediately in 
case of malfunction.
DO NOT open the housing.
Check local laws and contact the FAA to ensure safe operation in 
flight paths. 
Do not project the laser towards the sky as it may interfere with air 
traffic. 
To reduce the risk of fire and electric shock: 
a) Do not install on trees containing coverings that are or appear to 
be made of metal. 
b) Do not intertwine the product's electric cable with other cables 
or wires in a manner that may cut or damage the cable's insulation. 

MAINTENANCE & CLEANING

Maintenance and cleaning shall only be done to the product 
surface.
Unplug this product from the power socket before cleaning.
Do not wet any electrical parts of this product. Please use a dry, 
soft cloth for cleaning. Do not use sharp tools. 
Clean the lens regularly. It is recommended to clean the lens 
every 30 days. 
When not in use, store neatly in a cool, dry location protected 
from sunlight.
Please keep away from heaters and other heating sources.
When the product is placed on a live tree, the tree should be 
well maintained and fresh. Do not place on live trees in which 
the needles are brown or break off easily. Keep the tree stand 
filled with water.

This device complies with Part 15 of FCC Rules. Operation is subject 
to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received, including 

interference that may cause undesired operation.

Modifications not approved by the party responsible for compliance 
could void user’s authority to operate the equipment.

SPECIFICATIONS:

FCC COMPLIANCE:

Power input: AC 120V
Length of cable: 11.15ft(3.4m)
Laser class: IIIa
Laser power: Red: Maximum radiant power: 1.3mW;
                          Green: Maximum radiant power: 0.7mW
Working temperature: -30°C (-22°F) to 35°C (95°F)
IP protection: IP65
Indoor and outdoor use

If the product is placed on a tree, the tree should be well secured 
and stable.
When storing the product, carefully remove the product from 
wherever it has been place, such as the ground, trees, branches, 
or bushes, to avoid any undue strain or stress on the product's 
conductors, connections, and wires.

Summary of Contents for OUS00-0817






Reviews: