2. Mount the Aerial
Find a convenient indoor location to mount your aerial, then set up the channels using the following
"Scan the TV for Channels" steps below.
Note:
Test your aerial location after scanning for channels and before final mounting with the 3M
mounting stickers. In some instances, you may decide to relocate the aerial for better reception. See
“Aerial Placement Options and Tips” below.
3. Scan the TV for Channels
A.
In the TV’s setup menu, set the mode to Aerial or Air. Refer to the TV manual for detailed
instructions.
B.
While in the TV’s setup menu, set TV to scan for channels. This can sometimes be listed as
auto-program, channel search or channel scan. Consult your TV manual for detailed instructions.
Aerial Placement Options and Tips
TV reception and quality depends on the distance from the transmitting tower to your home.
Surrounding environments may also affect signal strength and reception.
If your reception is sporadic or needs to be improved, try the helpful tips below:
1.
Placing the aerial in a higher location may result in better reception.
2.
Facing the aerial towards the broadcast tower may result in better reception.
3.
Placing the aerial close to or on a window may also result in better reception.
Important:
Always re-scan for channels whenever you move your aerial.
Frequently Asked Questions
How many channels can I receive?
The number of channels you can receive will be determined by what is being broadcast in your area.
Channel reception will vary from location to location based on terrain (including trees, buildings,
hills and mountains). The fewer obstructions, the better your chance of receiving strong digital
signals. Go to
http://www.digitaluk.co.uk/
. Enter your address for a listing of likely channels
available in your area.
Do I need to use an External Amplifier?
An amplifier can enhance signals weakened by obstructions between you and the broadcast towers.
If your TV picture is not crystal clear, or you are unable get strong signals from distant towers, you
can use the amplifier to boost the weakened signals.
Note:
We do NOT recommend using the amplifier if your house is very close to the broadcast tower
and the signal is already very strong. A booster will cause self-oscillation and you may actually end
up getting fewer signals than without it.
Will all the channels I receive be High Definition (HD)?
Not all digital signals are High Definition (HD). Make sure you are using a High Definition Television
(HDTV) with built in DVB-T tuner. When connecting the aerial to a third-party receiver, make sure it
is capable of receiving HD. Otherwise no HD channels can be picked up.
里面
Connect the 3-meter coaxial cable to the
ANT/IN
or
CABLE IN
port on the back of
your TV. Note: For TV’s that require a tuner box, connect the coaxial cable to the
tuner box's ANT/IN or CABLE IN port.
See the “Final Configuration” Illustrations Below for
Both Connection Options
Back of TV
From 3-meter
Coaxial Cable
ANT/IN
CABLE IN
ANT/IN
When connected to HDTV with built in digital tuner
Digital
Aerial
HDTV
When connected through a digital converter box.
Digital Converter Box
Digital
Aerial
Traditional TV
1. Connect the Aerial on the Back of Your TV
1
2
