E. Installation:
Push button:
·
Select a suitable location for the doorbell,
usually close to your outside door.
·
Stick the push button to the wall using the
included double-sided adhesive.
Receiver:
Plug in the receiver into any safe power outlet.
Notes:
·
The push button and receiver can connect
with a range up to 150 meters/492 ft without
any obstacles.
·
The push button’s transmitting frequency is
433MHz and its range can be affected by
metal ,walls, concretes, and interfering signals
from other electronic appliances with the
same frequency including televisions, radios,
and cookers.
·
Please plug the receiver into any power outlet
that is far away from the above electronic
appliances and make sure there are no metal
obstructions between the receiver and the
outlet.
·
Please test the operating range of the receiver
and push button in your home before
installation.
·
Do not install the push button and receiver
near any source of naked flames such as
lighted candles.
·
Do not expose the push button and receiver
to direct sunlight or high temperatures,
otherwise overheating may cause them
irreparably damaged.
seconds and beep once. This means the
receiver is in pairing mode. Next press the
push button. If pairing is successful, the
receiver should ring. It normally takes about
10-15 seconds for the push button and
receiver to pair. If there is no pairing within 15
seconds, the LED will turn off and beep twice
and automatically exit pairing mode. Please
try pairing again.
- 07 -
- 08 -
