For the receiver:
Safety Note:
·
Please plug it into a safe power outlet.
·
Do not expose the receiver to water spray or
water drops and do not place liquid-filled
objects such as vases or opened drink
containers on or near the receiver and the
outlet.
·
Unplug the receiver immediately if you sense
a burning smell or smoke. Have qualified
personnel check the receiver before using it
again.
·
Unplug the receiver from the outlet if the
doorbell system is not to be used for an
extended period of time.
For the push button:
·
The push button is powered by a CR2032
battery. When exhausted, replace it using the
same type and voltage battery.
·
Always insert the battery using the correct
polarity to eliminate the danger of fire.
·
Keep old and new batteries away from
children.
·
Old batteries should be properly disposed
using safe environmental pracitices.
·
Remove the batteries from the push button
if you do not intend to use the push button
for an extended period of time.
·
Reinsert the back cover, making sure it is
securely closed to ensure IP protection.
Note: If the performance of the push button
deteriorates or compeletely stops, the
battery might be exhausted. Please replace
with another 3V type CR2032 battery.
4. Operation:
A. Selecting the notification mode:
The doorbell receiver can notify when the
push button has been pressed by playing a
ringing sound, flashing an LED, or ringing and
flashing an LED at the same time. These are
referred to as Sound, Flash, and Sound+Flash
mode.
- 03 -
- 04 -