Page 2 of 8
English V1.0
laatste wijziging: 07-8-2018
3.1 New user
New users must first create an account on www.12trace.nl. Go to the site, click on the '
login '
button and then click ' create account '. You will be prompted to fill in some data.
You need the product key. The product key can be found at the bottom of the GeoChaser. To
activate your account you will receive an e-mail message from [email protected] on your
specified email address, follow the instructions in this e-mail message. Your account and
GeoChaser are activated now. Note: the GeoChaser is equipped with a SIM card, DO NOT
CHANGE THE PIN CODE of the SIM card. It is not possible to use a different SIM card.
3.2 Existing user
If you already have a 12Trace account, you can add the GeoChaser to your account. Log in
to your account with the ' log in ' button and then click ' Add ', GeoChaser and fill in the
required information. Your GeoChaser is now activated en ready for use.
4. Voltage and contact detection
The red wire is plus 12/24V and the black wire is the ground. The white wire is for the contact
detection. This detection is necessary to activate a ride and allows for lower power
consumption once the vehicle is turned off. Connect the white wire to a tension on the
contact or connection that has only once the ignition of the vehicle is on.
