Page 5 of 8
English V1.0
laatste wijziging: 07-8-2018
6.4 Relay output
The GeoChaser has a built-in potential-free relay contact between the 2 yellow wires. This is a
normally open contact relay with a maximum switching voltage of 16VDC and a maximum
continuous current of 5A.
7. Set up the
GeoChaser
After signing in to the website account you will get an overview of your GeoLockers and
GeoChasers in your account. After selecting the device to get to the main screen of your
device. From here, you can change settings, check what the current position is and what
routes are possible, the current location and your amount of credits
