1010music BLACKBOX 1.5 User Manual Download Page 18

Page: 18 / 71

BLACKBOX USER MANUAL v 1.5

5/6/2020 8:54:00 PM

Page 17 of 70

Paramet
er

Description

Range of Values

Mod
Target?

Filter

Applies either a high pass or low pass
filter to this pad.

-100% to +100%

Negative values apply a low pass filter.
Positive values apply a high pass filter.

Yes

Launch
Mode

This controls how a note trigger affects
the playback of a pad.

Trigger:

Activate the Pad by touching

the pad or through

MIDI

note on.

Blackbox will start playback of the
WAV file and play through to the end.

Gate

: Begin the WAV file playback in

the same manner as

Trigger

mode. But

Gate

mode, playback will stop when

you release the touch or the

MIDI

note

is released.

Toggle

: Begin the WAV file playback in

the same manner as

Trigger

mode.

When another trigger event happens,
the playback will stop.

Attack

The time it takes for the sound to reach
its loudest level

0.0 to 100.0% The attack percentage is
a logarithmic scale between 0 and 9
seconds.

Decay

How long it takes for the sound to go
from the initial peak to the sustain level

0.0 to 100.0% The decay percentage is
a logarithmic scale between 0 and 38
seconds.

Sustain

The volume level that the sound
maintains when you hold a note

0.0 to 100.0%

Release

The release specifies how long the note
will continue to play and fade out when
the note is released. In

Gate

mode, the

release begins when the touch ends, the
gate signal goes low, or the MIDI note
off event occurs. In

Toggle

mode, the

release begins when the toggle off
occurs. In

Trigger

mode with sample pads

the release begins when reaching the
Loop End point in loop mode, or the
Start + Len point when not looping. In

Trigger

mode for Clips and Slicers, the

release has no effect.

0 to 100%

The release percentage is a

logarithmic scale between 0 and 38
seconds.

Summary of Contents for BLACKBOX 1.5








































































Search results

Summary of Contents for BLACKBOX 1.5

Reviews:

Related manuals for BLACKBOX 1.5

Brands by name

Popular brands

1010music BLACKBOX 1.5, User Manual

Search results

Summary of Contents for BLACKBOX 1.5

Reviews:

Related manuals for BLACKBOX 1.5

Brands by name

Popular brands