39
DVR Configuration
5
Scroll down and enter your information for: Company (Department),
Driver (Last Name), I.D. (Unit/Badge #).
6
Press the ‘
Save
’ button when done to save your changes.
If an administrator username and password has not been
defined, use the defaults:
username: admin
password: 111111
This is the ID that will be displayed in recordings to identify which
unit made the recording. Up to 8 characters can be used here.
2nd Camera Configuration
If your department purchased the optional second camera, it needs to be
activated before it is recognized by the DVR:
1
Press ‘Menu’ on the remote. (FIG. 12)
2
Select ‘
Record
’.
3
Select ‘
Channel
’.
4
Set ‘
Ch 2
’ to “On” and match all of the settings used to configure
Channel 1.
