ZyXEL Communications ZyXEL ZyWALL 2WE, Компактное руководство

Страница: 7 / 42

ZyWALL 2WE
7
LED COLOR STATUS MEANING
LAN
10/100M
1-4 Green
Orange On
On
Flashing
Off The ZyWALL has a LAN connection of 10Mbps.
The ZyWALL has a LAN connection of 100Mbps.
The ZyWALL is sending/receiving packets.
The ZyWALL does not have an Ethernet connection.
10/100M
WAN Green
Orange
On
On
Flashing
Off The WAN link is connected at 10Mbps.
The WAN link is connected at 100Mbps.
The WAN link is sending/receiving packets.
The WAN link is not ready, or has failed.
CON/AUX Off The CON/AUX link is not ready, or has failed. Green
On The CON/AUX switch is set to CON and the CON/AUX port is
connected to a management computer.
Orange Off The CON/AUX link is not ready, or has failed.
On The CON/AUX switch is set to AUX and the CON/AUX port has an
Internet connection through a dial-up modem.
Flashing The CON/AUX switch is set to AUX and the CON/AUX port is
sending or receiving data through a dial-up modem.
WLAN Green On
Off
Flashing The Wireless LAN feature is enabled.
The Wireless LAN link is not ready, or has failed.
The Wireless LAN link is sending/receiving packets.
3 Setting Up Your Computer’s IP Address
Skip this section if your computer is already set up to accept a dynamic IP
address. This is the default for most new computers.
The ZyWALL is already set up to assign your computer an IP address. Use this section to set up
your computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to
192.168.1.254 range with a subnet mask of 255.255.255.0. This is necessary to ensure that your
computer can communicate with your ZyWALL.
Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already be installed
on computers using Windows NT/2000/XP, Macintosh OS 7 and later
3.1 Windows NT/2000/XP
1. In Windows XP, click start , Control Panel . In Windows 2000/NT, click Start , Settings , Control Panel .
2. In Windows XP, click Network Connections .
In Windows 2000/NT, click Network and Dial-up Connections .
3. Right-click Local Area Connection and then click Properties .