ZyXEL Communications ZyXEL ZyWALL 2WE, Компактное руководство

Страница: 26 / 42

ZyWALL 2WE
26
LABEL Description
Source Address Click SrcAdd to add a new address, SrcEdit to edit an existing one or SrcDelete to
delete one.
Destination
Address Click DestAdd to add a new address, DestEdit to edit an existing one or DestDelete to
delete one.
Available/
Selected Services Highlight a service from the Available Services box on the left, then click >> to add it to
the Selected Services box on the right. To remove a service, highlight it in the Selected
Services box on the right, then click << .
Custom Port
Add Click this button to bring up the screen that you use to configure a new custom service
that is not in the predefined list of services.
Edit Select a custom service (denoted by an “*”) from the Available Services list and click this
button to edit the service.
Delete Select a custom service (denoted by an “*”) from the Available Services list and click this
button to remove the service.
Block Services
according to this
schedule :
Day to Block Select everyday or the day(s) of the week to activate blocking.
Time of Day to
Block (24-Hour
Format) Select All Day or enter the start and end times in the hour-minute format to activate
blocking.
Action for Matched
Packets Use the drop down list box to select whether to discard ( Block ) or allow the passage of
( Forward ) packets that match this rule.
Log This field determines if a log is created for packets that match the rule ( Match ), don't
match the rule ( Not Match ), both ( Both ) or no log is created ( None ). Go to the Log
Settings page and select the Access Control logs category to have the ZyWALL record
these logs.
Alert Check the Alert check box to determine that this rule generates an alert when the rule is
matched.
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving.
5.10 Configuring Source and Destination Addresses
To add a new source or destination address, click SrcAdd or DestAdd from the previous screen. To
edit an existing source or destination address, select it from the box and click SrcEdit or DestEdit
from the previous screen . Either action displays the following screen.