ZyXEL Communications ZyWall, Справочное руководство

Страница: 294 / 394

Chapter 35 System
ZyWALL (ZLD) CLI Reference Guide
294
35.4.1 Date/Time Commands
The following table describes the commands available for date and time setup. You must use
the
configure terminal
command to enter the configuration mode before you can use
these commands.
Table 162 Command Summary: Date/Time
COMMAND DESCRIPTION
clock date yyyy-mm-dd time hh:mm:ss
Sets the new date in year, month and day format
manually and the new time in hour, minute and
second format.
[no] clock daylight-saving
Enables daylight saving. The
no
command
disables daylight saving.
[no] clock saving-interval begin
{apr|aug|dec|feb|jan|jul|jun|mar|may|nov|oct|se
p} {1|2|3|4|last} {fri|mon|sat|sun|thu|tue|wed}
hh:mm end
{apr|aug|dec|feb|jan|jul|jun|mar|may|nov|oct|se
p} {1|2|3|4|last} {fri|mon|sat|sun|thu|tue|wed}
hh:mm offset
Configures the day and time when Daylight
Saving Time starts and ends. The
no
command
removes the day and time when Daylight Saving
Time starts and ends.
offset: a number from 1 to 5.5 (by 0.5 increments)
clock time hh:mm:ss
Sets the new time in hour, minute and second
format.
[no] clock time-zone {-|+ hh }
Sets your time zone. The
no
command removes
time zone settings.
[no] ntp
Saves your date and time and time zone settings
and updates the data and time every 24 hours.
The
no
command stops updating the data and
time every 24 hours.
[no] ntp server { fqdn | w.x.y.z }
Sets the IP address or URL of your NTP time
server. The
no
command removes time server
information.
ntp sync
Gets the time and date from a NTP time server.
show clock date
Displays the current date of your ZyWALL.
show clock status
Displays your time zone and daylight saving
settings.
show clock time
Displays the current time of your ZyWALL.
show ntp server
Displays time server settings.