ZyXEL Communications ZyWall Скачать руководство пользователя

Страница: 130 / 394

Chapter 15 Firewall

ZyWALL (ZLD) CLI Reference Guide

130

15.2.1 Firewall Sub-Commands

The following table describes the sub-commands for several firewall commands.

Table 65

firewall Sub-commands

COMMAND

DESCRIPTION

action {allow|deny|reject}

Sets the action the ZyWALL takes when packets
match this rule.

[no] activate

Enables a firewall rule. The

command disables

the firewall rule.

[no] ctmatch {dnat | snat}

Use

dnat

to block packets sent from a computer

on the ZyWALL’s WAN network from being
forwarded to an internal network according to a
virtual server rule.
Use

snat

to block packets sent from a computer

on the ZyWALL’s internal network from being
forwarded to the WAN network according to a 1:1
NAT or Many 1:1 NAT rule.
The

command forwards the matched packets.

[no] description

description

Sets a descriptive name (up to 60 printable ASCII
characters) for a firewall rule. The

command

removes the descriptive name from the rule.

[no] destinationip

address_object

Sets the destination IP address. The

command

resets the destination IP address(es) to the default
(

any

means all IP addresses.

[no] from

zone_object

Sets the zone on which the packets are received.
The

command removes the zone on which the

packets are received and resets it to the default
(

any

means all interfaces or VPN tunnels.

[no] log [alert]

Sets the ZyWALL to create a log (and optionally an
alert) when packets match this rule. The

command sets the ZyWALL not to create a log or
alert when packets match this rule.

[no] schedule

schedule_object

Sets the schedule that the rule uses. The

command removes the schedule settings from the
rule.

[no] service

service_name

Sets the service to which the rule applies. The

command resets the service settings to the default
(

any

means all services.

[no] sourceip

address_object

Sets the source IP address(es). The

command

resets the source IP address(es) to the default
(

any

means all IP addresses.

[no] sourceport {tcp|udp} {eq

<1..65535>|range <1..65535> <1..65535>}

Sets the source port for a firewall rule. The

command removes the source port from the rule.

[no] to {

zone_object

|ZyWALL}

Sets the zone to which the packets are sent. The

command removes the zone to which the

packets are sent and resets it to the default (

any

means all interfaces or VPN tunnels.

[no] user

user_name

Sets a user-aware firewall rule. The rule is
activated only when the specified user logs into the
system. The

command resets the user name to

the default (

any

means all users.

Содержание ZyWall











































































































































































































































































































































































































Результаты поиска

Содержание ZyWall

Отзывы:

Похожие инструкции для ZyWall

Бренды по названию

Популярные бренды

ZyXEL Communications ZyWall, Справочное руководство

Результаты поиска

Содержание ZyWall

Отзывы:

Похожие инструкции для ZyWall

Бренды по названию

Популярные бренды