manualshive.com logo in svg

ZyXEL Communications ZyWALL USG Series, Справочное руководство

Серия сетевых защитных межсетевых экранов ZyXEL Communications ZyWALL USG обеспечивает высокую безопасность сети. Загрузите бесплатное Руководство по эксплуатации с нашего сайта, чтобы узнать все особенности устройства. Возможность скачать его с manualshive.com.

Поделиться
Скачать
background image

Chapter 59 Maintenance Tools

ZyWALL / USG (ZLD) CLI Reference Guide

380

file-suffix <

profile_name

>

Specifies text to add to the end of the file name (before the dot and 
filename extension) to help you identify the packet capture files. Modifying 
the file suffix also avoids making new capture files that overwrite existing 
files of the same name. 

The file name format is “interface name-file suffix.cap”, for example 
“vlan2-packet-capture.cap”.

files-size <1..10000>

Specify a maximum size limit in megabytes for the total combined size of 
all the capture files on the ZyWALL, including any existing capture files and 
any new capture files you generate.

The ZyWALL / USG stops the capture and generates the capture file when 
either the file reaches this size or the time period specified ( using the 

duration

 command above) expires.

host-ip {

ip-address 

| 

profile_name 

| any>

Sets a host IP address or a host IP address object for which to capture 
packets. 

any

 means to capture packets for all hosts. 

host-port <0..65535>

If you set the IP Type to 

any

, 

tcp

, or 

udp

 using the 

proto-type

 command 

below, you can specify the port number of traffic to capture.

iface {add | del} {

interface_name 

| 

virtual_interface_name

}

Adds or deletes an interface or a virtual interface for which to capture 
packets to the capture interfaces list.

ip-version {ip|ip6|any}

Sets wether to capture IPv4 or IPv6 traffic. Any means to capture packets 
for all types of traffic.

proto-type {icmp | icmp6 | igmp | 

igrp | pim | ah | esp | vrrp | udp 

| tcp | any}

Sets the protocol of traffic for which to capture packets. 

any

 means to 

capture packets for all types of traffic.

snaplen <68..1512>

Specifies the maximum number of bytes to capture per packet. The 
ZyWALL / USG automatically truncates packets that exceed this size. As a 
result, when you view the packet capture files in a packet analyzer, the 
actual size of the packets may be larger than the size of captured packets.

storage <internal|usbstorage>

Sets to have the ZyWALL / USG only store packet capture entries on the 
ZyWALL / USG (internal) or on a USB storage connected to the ZyWALL / 
USG.

ring-buffer <enable|disable>

Enables or disables the ring buffer used as a temporary storage.

split-size <1..2048>

Specify a maximum size limit in megabytes for individual packet  capture 
files. After a packet capture file reaches this size, the ZyWALL / USG starts 
another packet capture file.

 Ping {

ipv4 

| 

hostname

} [source 

ipv4

] 

[size <0..65507>] [forever| count 

<1..4096>]

Sends an ICMP ECHO_REQUEST to test the reachability of a host on an 
IPv4 network and to measure the round-trip time for a message sent from 
the originating host to the destination computer.

size

: specifies the number of data bytes to be sent

count

: Stop after sending this number of ECHO_REQUEST packets.

forever

: keep sending ECHO_REQUEST packets until you use Ctrl+c to 

stop.

ping6{

ipv6 

| 

hostname

} [source 

ipv6

] 

[size <0..65527>] [forever| count 

<1..4096>] [interface {

interface_name

 | 

virtual_interface_name

}][extension 

filter_extension

]

Sends an ICMP ECHO_REQUEST to test the reachability of a host on an 
IPv6 network and to measure the round-trip time for a message sent from 
the originating host to the destination computer.

interface_name

: specifies interface through which to send the 

ECHO_REQUEST packets.

filter_extension

: You can use 1-256 alphanumeric characters, spaces, 

or '()+,/:=?;!*#@$_%.- characters.

show packet-capture status

Displays whether a packet capture is ongoing.

Table 229   

Maintenance Tools Commands in Privilege Mode (continued)

COMMAND

DESCRIPTION

Содержание ZyWALL USG Series











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ZyWALL USG Series

Ruijie Networks RG-WALL1600-S3600 Hardware Installation And Reference Manual preview
RG-WALL1600-S3600
Бренд: Ruijie Networks Страницы: 28
ADTRAN Advanta 2100 Specifications preview
Advanta 2100
Бренд: ADTRAN Страницы: 2
ZyXEL Communications USG110 Specifications preview
USG110
Бренд: ZyXEL Communications Страницы: 8
IBASE Technology FWA8708-C User Manual preview
FWA8708-C
Бренд: IBASE Technology Страницы: 73
Dell SonicWall NSA 2600 Getting Started Manual preview
SonicWall NSA 2600
Бренд: Dell Страницы: 58
SonicWALL SuperMassive 9800 AC Installation Manual preview
SuperMassive 9800 AC
Бренд: SonicWALL Страницы: 2
SonicWALL SOHO Wireless Quick Start Manual preview
SOHO Wireless
Бренд: SonicWALL Страницы: 2
SonicWALL SMA 7210 Replacement And Installation preview
SMA 7210
Бренд: SonicWALL Страницы: 2
SonicWALL SSL-IA Hardware Manual preview
SSL-IA
Бренд: SonicWALL Страницы: 4
SonicWALL Secure Mobile Access 6210 Installation Manual preview
Secure Mobile Access 6210
Бренд: SonicWALL Страницы: 2
SonicWALL NSa 6700 Quick Start Manual preview
NSa 6700
Бренд: SonicWALL Страницы: 2
SonicWALL NSa 2700 Quick Start Manual preview
NSa 2700
Бренд: SonicWALL Страницы: 2
SonicWALL TZ 100 / 200 Quick Start Manual preview
TZ 100 / 200
Бренд: SonicWALL Страницы: 9
SonicWALL TZ 150 Wireless Getting Started Manual preview
TZ 150 Wireless
Бренд: SonicWALL Страницы: 37
SonicWALL TZ 190 User Manual preview
TZ 190
Бренд: SonicWALL Страницы: 46
SonicWALL SuperMassive 9800 Getting Started Manual preview
SuperMassive 9800
Бренд: SonicWALL Страницы: 76
SonicWALL SonicOS Enhanced 2.2 Administrator'S Manual preview
SonicOS Enhanced 2.2
Бренд: SonicWALL Страницы: 190
BuildingLink KeyLink Product Specifications & Setup Manual preview
KeyLink
Бренд: BuildingLink Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды