manualshive.com logo in svg

ZyXEL Communications ZyWALL 35 Series, Руководство пользователя

Серия сетевых устройств ZyXEL Communications ZyWALL 35 - надежное и безопасное решение для защиты вашей сети. Получите пользовательское руководство бесплатно, загрузив его с manualshive.com. Изучите все функции и возможности этого продукта для обеспечения безопасности вашей сети.

Поделиться
Скачать
background image

 Chapter 10 WLAN

ZyWALL 5/35/70 Series User’s Guide

215

The following table describes the labels in this screen.

Table 53   

NETWORK > WLAN

LABEL

DESCRIPTION

WLAN TCP/IP 

IP Address

Type the IP address of your ZyWALL’s WLAN interface in dotted decimal notation. 
Alternatively, click the right mouse button to copy and/or paste the IP address.

Note: Make sure the IP addresses of the LAN, WAN, WLAN and 

DMZ are on separate subnets.

IP Subnet Mask

The subnet mask specifies the network number portion of an IP address. Your 
ZyWALL automatically calculates the subnet mask based on the IP address that 
you assign. Unless you are implementing subnetting, use the subnet mask 
computed by the ZyWALL.

RIP Direction

RIP (Routing Information Protocol, RFC1058 and RFC 1389) allows a router to 
exchange routing information with other routers. The 

RIP Direction

 field controls 

the sending and receiving of RIP packets. Select the RIP direction from 

Both

/

In 

Only

/

Out Only

/

None

. When set to 

Both

 or 

Out Only

, the ZyWALL will broadcast 

its routing table periodically. When set to 

Both

 or 

In Only

, it will incorporate the 

RIP information that it receives; when set to 

None

, it will not send any RIP packets 

and will ignore any RIP packets received. 

Both

 is the default.

RIP Version

The 

RIP Version

 field controls the format and the broadcasting method of the RIP 

packets that the ZyWALL sends (it recognizes both formats when receiving). 

RIP-1

 

is universally supported but RIP-2 carries more information. RIP-1 is probably 
adequate for most networks, unless you have an unusual network topology. Both 

RIP-2B

 and 

RIP-2M

 sends the routing data in RIP-2 format; the difference being 

that 

RIP-2B

 uses subnet broadcasting while 

RIP-2M

 uses multicasting. 

Multicasting can reduce the load on non-router machines since they generally do 
not listen to the RIP multicast address and so will not receive the RIP packets. 
However, if one router uses multicasting, then all routers on your network must use 
multicasting, also. By default, RIP direction is set to 

Both

 and the Version set to 

RIP-1

.

Multicast

Select 

IGMP V-1

 or 

IGMP V-2 

or 

None

. IGMP (Internet Group Management 

Protocol) is a network-layer protocol used to establish membership in a Multicast 
group - it is not used to carry user data. IGMP version 2 (RFC 2236) is an 
improvement over version 1 (RFC 1112) but IGMP version 1 is still in wide use. If 
you would like to read more detailed information about inter-operability between 
IGMP version 2 and version 1, please see 

sections 4 and 5 of RFC 2236

.

DHCP Setup

DHCP 

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows 
individual clients (workstations) to obtain TCP/IP configuration at startup from a 
server. Unless you are instructed by your ISP, leave this field set to 

Server

. When 

configured as a server, the ZyWALL provides TCP/IP configuration for the clients. 
When set as a server, fill in the 

IP Pool Starting Address 

and

 Pool Size

 fields.

Select 

Relay 

to have the ZyWALL forward DHCP requests to another DHCP 

server. When set to 

Relay

, fill in the 

DHCP Server Address 

field.

Select 

None 

to stop the ZyWALL from acting as a DHCP server. When you select 

None

, you must have another DHCP server on your WLAN, or else the computers 

must be manually configured. 

IP Pool Starting 
Address

This field specifies the first of the contiguous addresses in the IP address pool.

Pool Size

This field specifies the size, or count of the IP address pool.

DHCP Server 
Address

Type the IP address of the DHCP server to which you want the ZyWALL to relay 
DHCP requests. Use dotted decimal notation. Alternatively, click the right mouse 
button to copy and/or paste the IP address.

Содержание ZyWALL 35 Series









































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ZyWALL 35 Series

Draytek VigorPro 5510 Series User Manual preview
VigorPro 5510 Series
Бренд: Draytek Страницы: 316
Juniper SRX5600 Hardware Manual preview
SRX5600
Бренд: Juniper Страницы: 483
Watchguard WatchGuard XCS 170 Quick Start Manual preview
WatchGuard XCS 170
Бренд: Watchguard Страницы: 4
Watchguard SSL 100 Quick Start Manual preview
SSL 100
Бренд: Watchguard Страницы: 4
Watchguard XTM 330 Quick Start Manual preview
XTM 330
Бренд: Watchguard Страницы: 11
Watchguard XTM 2520 Quick Start Manual preview
XTM 2520
Бренд: Watchguard Страницы: 12
Watchguard Firebox T35 Hardware Manual preview
Firebox T35
Бренд: Watchguard Страницы: 16
Watchguard QMS 1200 Quick Start Manual preview
QMS 1200
Бренд: Watchguard Страницы: 44
Watchguard SOHO SOHO and SOHO | tc User Manual preview
SOHO SOHO and SOHO | tc
Бренд: Watchguard Страницы: 80
Watchguard Firebox V10 Installation Manual preview
Firebox V10
Бренд: Watchguard Страницы: 97
Watchguard SOHO User Manual preview
SOHO
Бренд: Watchguard Страницы: 118
Watchguard Firebox X10E User Manual preview
Firebox X10E
Бренд: Watchguard Страницы: 314
Watchguard Firebox V10 User Manual preview
Firebox V10
Бренд: Watchguard Страницы: 477
PaloAlto Networks ION 2000 Hardware Reference Manual preview
ION 2000
Бренд: PaloAlto Networks Страницы: 34
D-Link NetDefend DFL-CP310 Cli Reference Manual preview
NetDefend DFL-CP310
Бренд: D-Link Страницы: 455
D-Link NetDefend SOHO DFL-160 Reference Manual preview
NetDefend SOHO DFL-160
Бренд: D-Link Страницы: 356
D-Link DFL-1600 - Security Appliance User Manual preview
DFL-1600 - Security Appliance
Бренд: D-Link Страницы: 552

Бренды по названию

Популярные бренды

Загрузить еще бренды