ZyXEL Communications ZyWALL 110 Series Скачать руководство пользователя страница 498 | Manualshive

Страница: 498 / 562

ZyXEL Communications ZyWALL 110 Series Скачать руководство пользователя страница 498

Chapter 38 Log and Report

ZyWALL 110/310/1100 Series User’s Guide

498

System Log

Select which events you want to log by Log Category. There are three choices:

disable all logs (red X) - do not log any information from this category

enable normal logs (green check mark) - create log messages and alerts from this
category

enable normal logs and debug logs (yellow check mark) - create log messages, alerts,
and debugging information from this category; the ZyWALL does not e-mail debugging
information, however, even if this setting is selected.

USB Storage

Select which event log categories to save to a connected USB storage device. There are
three choices:

disable all logs (red X) - do not log any information from this category

enable normal logs (green check mark) - save log messages and alerts from this category

enable normal logs and debug logs (yellow check mark) - save log messages, alerts,
and debugging information from this category.

E-mail Server 1
E-mail

Select whether each category of events should be included in the log messages when it is e-
mailed (green check mark) and/or in alerts (red exclamation point) for the e-mail settings
specified in E-Mail Server 1. The ZyWALL does not e-mail debugging information, even if it
is recorded in the System log.

E-mail Server 2
E-mail

Select whether each category of events should be included in log messages when it is e-
mailed (green check mark) and/or in alerts (red exclamation point) for the e-mail settings
specified in E-Mail Server 2. The ZyWALL does not e-mail debugging information, even if it
is recorded in the System log.

Remote Server
1~4

For each remote server, select what information you want to log from each Log Category
(except All Logs; see below). Choices are:

disable all logs (red X) - do not log any information from this category

enable normal logs (green check mark) - log regular information and alerts from this
category

enable normal logs and debug logs (yellow check mark) - log regular information,
alerts, and debugging information from this category

OK

Click this to save your changes and return to the previous screen.

Cancel

Click this to return to the previous screen without saving your changes.

Table 199

Configuration > Log & Report > Log Setting > Log Category Settings (continued)

LABEL

DESCRIPTION

«
...
496
497
498
499
500
...
»

Содержание ZyWALL 110 Series



















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов