ZyAIR G-220 User’s Guide
Access Point Mode Configuration
3-5
Table 3-2 Station Mode: More Setting…
LABEL DESCRIPTION
Tx Rate
Select a transmission speed from the drop-down list box. Choose from
Auto
(default),
1
Mbps
,
2 Mbps
,
5.5 Mbps
,
11 Mbps
,
6 Mbps
,
9 Mbps
,
12 Mbps
,
18 Mbps
,
24 Mbps
,
36
Mbps
,
48 Mbps
, and
54 Mbps
.
SSID
Enter the SSID of the wireless network to which you want to associate. To associate to
an ad-hoc network, you must enter the same SSID as the peer computer.
Otherwise, select
Any
check box
to associate to or roam between any infrastructure
wireless networks.
Network Type
Select
Infrastructure
or
Ad-Hoc
from the drop-down list box.
Select
Infrastructure
to associate to an AP.
Select
Ad-Hoc
to associate to a peer computer.
Encryption
Select
Disable WEP
to deactivate the WEP encryption.
Select
Enable WEP
to activate the WEP encryption and click
WEP Encryption Key
Setting
to configure the WEP keys. Refer to
Section 3.4
for more information.
Authentication
Mode
Select an authentication method. Choices are
Auto
,
Shared
Key
and
Open System
.
Refer to
Section 2.5
for more information.
Apply/Change Click
Apply
to save the changes back to the ZyAIR, or click
Change
to start configuring
the fields.
Encryption Setting
WEP Key
Setting…
Click
WEP Encryption Key Setting
to display the screen and configure WEP key
settings.
Profile
The Profile
function allows you to save the wireless network settings in this
screen, or use one of the pre-
configured network profiles.
Profile name
Enter a descriptive name in this field or select a pre-configured network profiles from the
drop-down list.
Load To use a previously saved network profile, select the profile file name from the drop-
down list box and click
Load
.
Save Current Enter a descriptive name in the
Profile name
field and click
Save Current
to save the
current settings in this
screen to a new profile. This also activates the new profile at the
same time.
Delete To delete an existing wireless network configuration, select a profile from the drop-down
list box and click
Delete
.