ZyXEL Communications ZyAIR B-620, Руководство пользователя

Страница: 34 / 52

ZyAIR B-620 User’s Guide
3-12 Using the ZyAIR Utility
Table 3-7 ZyAIR Utility: Configuration
FIELD DESCRIPTION
Service Set
Identifier (SSID) Enter the SSID of the AP or the peer ad-hoc computer to which you want to associate in
this field. To associate to an ad-hoc network, you must enter the same SSID as the peer
ad-hoc computer.
Enter
Any to associate to or roam between any infrastructure wireless networks. This is
the default setting.
Transfer Rate Select a transmission speed from the drop-down list box. Choose from Fully Auto
(default), 1M bit/sec , 2M bit/sec , 5.5M bit/sec and 11M bit/sec .
Channel Select the channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer ad-hoc computer.
Power Saving
Mode Select Enable from the drop-down list menu to save power (especially for laptop
computers). This forces the ZyAIR to go to sleep mode when it is not transmitting data.
When you select
Disable , the ZyAIR will never go to sleep mode.
Restore Default Click Restore Default to reset all fields back to factory default values.
Undo Changes Click Undo Changes to start configuring the fields again.
Apply Changes Click Apply Changes to save the changes back to ZyAIR.
3.9 Network Configuration Profile Setting
The Profile in the Configuration screen allows you to save the wireless network settings in the
Configuration screen, use one of the pre-configured network profiles or reset the settings in the
Configuration screen to the factory default values.
The configuration Profile includes the security profiles in the Security screen.
3.9.1 Resetting to Factory Default Values
To reset the fields in the Configuration screen back to factory default values select Default from the drop-
down list menu and click Activate .
3.9.2 Saving the Current Setting to a Profile
To save the current settings in the Configuration screen to a new profile enter a descriptive name in the
field provided and click Create .