2. errlog/syslog save to rom at the same time
3. crash dump save to Rom ( command
“sys dbg disp”)
4.
Add a comment "show tech support" (command “show tech support”)
5. show IP at " NO authentication: Telnet authentication failure [username: admin]
6. Add a log when memory section changed
7. Add power supply status in hardware monitor
8. Support ES common MIB
Limitation of Settings:
1.
VLAN 1Q static entry
4K
2.
Static MAC forwarding entry
256
3.
MAC filtering entry
256
4.
Cluster member
24
5.
IP routing domain
128
6.
IGMP Filtering entry
256
7.
IGMP MVR entry
256
8.
VRRP entry
64
9.
Protocol based VLAN entries per port
7
10. Port-security max address-limit number
16K
11. DHCP Server
16
12. Syslog server entry
4
13. IP source guard entry
1K
14. IP subnet based VLAN entry
16
15. MVR VLAN entry
5
16. Vlan-stacking Selective QinQ entry
1K
17. Vlan-mapping entry
1K
18. MAC table
16K
19. Routing table
1k
20. DHCP snooping binding table
16K
21. Routing path
512
22. Multicast group
1K
23. ACL 384
24. Policy route
64
25. DHCP option 82 profile 130
26. Remote port monitoring vlan
10
27. trtcm DSCP profiles
max number of port
28. static arp entry
256
29. Static route max entry
64
Firmware Upgrade:
The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server.
You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP.
The upgrade procedure is as follows:
Upgrade XGS3700-24HP FW:
C:\> ftp <XGS3700-24HP IP address>
User : admin
Password: 1234
230 Logged in
ftp> put 410AAGD3C0.bin ras-0
ftp> bye
Where
