ZyXEL Communications WAP3205 v2, Руководство пользователя

Страница: 81 / 190

Chapter 10 Wireless LAN
WAP3205 v2 User’s Guide
81
10.5 Wireless Security Screen
Use this screen to select the wireless security mode for each SSID. Click Network > Wireless LAN
> Security to open the Security screen. The screen varies depending on what you select in the
Security Mode field.
10.5.1 No Security
Select No Security to allow wireless clients to communicate with the access points without any
data encryption.
Note: If you do not enable any wireless security on your WAP3205 v2, your network is
accessible to any wireless networking device that is within range.
Figure 57
Network > Wireless LAN > Security: No Security
The following table describes the labels in this screen.
Enable Guest
WLAN
Select this to forward any traffic from clients that connect to this SSID to the first LAN port
on the WAP3205 v2. Clients that connect to this SSID will not be able to access the
WAP3205 v2’s second LAN port.
Channel
Selection Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. The options vary depending on the
frequency band and the country you are in.
This option is only available if Auto Channel Selection is disabled.
Auto Channel
Selection
Select the check box to have the WAP3205 v2 automatically scan for and select a channel
which is not used by another device.
Operating
Channel This displays the channel the WAP3205 v2 is currently using.
Apply Click Apply to save your changes back to the WAP3205 v2.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 31
Network > Wireless LAN > General
LABEL DESCRIPTION
Table 32
Network > Wireless LAN > Security: No Security
LABEL DESCRIPTION
SSID Select the SSID for which you want to configure the security.
Security Mode Choose No Security from the drop-down list box.