ZyXEL Communications WAP3205 v2, Руководство пользователя

Страница: 58 / 190

Chapter 8 Tutorials
WAP3205 v2 User’s Guide
58
Follow the steps below to configure the wireless settings on your WAP3205 v2.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
Section 6.2 on page 41 ).
1
Set your WAP3205 v2 to work as an access point. See Section 2.1.1.1 on page 14 .
2
Open the Wireless LAN > General screen in the AP’s Web Configurator.
3
Enter SSID_Example3 as the SSID and select a channel or select Auto Channel Selection to
have the WAP3205 v2 scans for and select an available channel automatically. Click Apply .
4
Click the Security tab.
5
Select the SSID ( SSID_Example3 ) for which you want to configure the security. Set security mode
to WPA-PSK and enter ThisismyWPA-PSKpre-sharedkey in the Pre-Shared Key field. Click
Apply .
6
Open the Status screen. Verify your wireless and wireless security settings under Device
Information and check if the WLAN connection is up under Interface Status .
Channel Auto
Security WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)