ZyXEL Communications WAH7130, Руководство пользователя

Страница: 66 / 102

Chapter 10 Maintenance
WAH7130 User’s Guide
70
The following table describes the labels in this screen.
10.4 Password Screen
It is strongly recommended that you change your WAH7130's password.
If you forget your WAH7130's password (or IP address), you will need to reset the device. See
Section 10.8 on page 75 for details.
Click Maintenance > Password . The screen appears as shown.
Figure 38
Maintenance > Password
The following table describes the labels in this screen.
Table 31
Maintenance > General
LABEL DESCRIPTION
System Name System Name is a unique name to identify the WAH7130 in an Ethernet network.
Domain Name Enter the domain name you want to give to the WAH7130.
Administrator
Inactivity Timer Type how many minutes a management session can be left idle before the session times
out. The default is 5 minutes. After it times out you have to log in with your password
again. Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Apply Click Apply to save your changes back to the WAH7130.
Cancel Click Cancel to begin configuring this screen afresh.
Table 32
Maintenance > Password
LABEL DESCRIPTION
Old Password Type the default password or the existing password you use to access the system in
this field.
New Password Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm Type the new password again in this field.
Apply Click Apply to save your changes back to the WAH7130.
Cancel Click Cancel to begin configuring this screen afresh.