manualshive.com logo in svg

ZyXEL Communications VMG8825-B Series, Руководство пользователя, Страница: 24 / 360

Поделиться
Скачать
ZyXEL Communications VMG8825-B Series Скачать руководство пользователя страница 24

Chapter 1 Introducing the VMG

VMG8825-B Series User’s Guide

24

None of the LEDs are on if the VMG is not receiving power.

Table 2   LED Descriptions

LED

COLOR

STATUS

DESCRIPTION

Power

Green

On

The VMG is receiving power and ready for use.

Blinking

The VMG is self-testing.

Red

On

The VMG detected an error while self-testing, or there is a device 
malfunction.

Blinking

The VMG is upgrading firmware.

Off

The VMG is not receiving power.

DSL/Ethernet 
WAN

Green

On

The VDSL line or a successful 10/100/1000 Mbps Ethernet connection on the 
WAN is up.

Blinking 
(slow)

The VMG is looking for a VDSL line.

Blinking 
(Fast)

The VMG is initializing the VDSL line.

Off

There is no Ethernet connection on the WAN.

Amber

On

The ADSL line  on the WAN is up.

Blinking 
(slow)

The VMG is looking for an ADSL line.

Blinking 
(Fast)

The VMG is initializing the ADAL line.

Internet

Green

On

The VMG has an IP connection but no traffic.

Your device has a WAN IP address (either static or assigned by a DHCP 
server), PPP negotiation was successfully completed (if used) and the DSL 
connection is up.

Blinking

The VMG is sending or receiving IP traffic.

Off

There is no Internet connection or the gateway is in bridged mode.

Red

On

The VMG attempted to make an IP connection but failed. Possible causes 
are no response from a DHCP server, no PPPoE response, PPPoE 
authentication failed.

LAN1~4

Green

On

The VMG has a successful 10/100/1000 Mbps Ethernet connection with a 
device on the Local Area Network (LAN). 

Blinking 

The VMG is sending or receiving data to/from the LAN at 10/100/1000 
Mbps.

Off

The VMG does not have an Ethernet connection with the LAN.

WLAN/WPS

Green

On

The 2.4 GHz or 5 GHz wireless network is activated.

Blinking

The VMG is communicating with 2.4 GHz or 5 GHz wireless clients.

Amber

Blinking

The VMG is setting up a WPS connection with a 2.4 GHz or 5 GHz wireless 
client.

Off

The 2.4 GHz or 5 GHz wireless network is not activated.

Содержание VMG8825-B Series









































































































































































































































































































































































Отзывы:

Нет отзывов