ZyXEL Communications VMG4005-B50A Скачать руководство пользователя страница 66

Страница: 66 / 86

VMG4005-B50A/B60A User’s Guide

HAPTER

Troubleshooting

This chapter offers some suggestions to solve problems you might encounter. The potential problems are
divided into the following categories.

•

Power, Hardware Connections, and LEDs

•

VMG Access and Login

•

Internet Access

•

IP Address Setup

18.1 Power, Hardware Connections, and LEDs

The VMG does not turn on. None of the LEDs turn on.

Make sure the VMG is turned on.

Make sure you are using the power adapter included with the VMG.

Make sure the power adapter is connected to the VMG and plugged in to an appropriate power
source. Make sure the power source is turned on.

Turn the VMG off and on.

If the problem continues, contact the vendor.

One of the LEDs does not behave as expected.

Make sure you understand the normal behavior of the LED. See

Figure 4 on page 12

Check the hardware connections.

Inspect your cables for damage. Contact the vendor to replace any damaged cables.

Turn the VMG off and on.

If the problem continues, contact the vendor.

Содержание VMG4005-B50A























































































Результаты поиска

Содержание VMG4005-B50A

Отзывы:

Похожие инструкции для VMG4005-B50A

Бренды по названию

Популярные бренды

ZyXEL Communications VMG4005-B50A, Руководство пользователя

Результаты поиска

Содержание VMG4005-B50A

Отзывы:

Похожие инструкции для VMG4005-B50A

Бренды по названию

Популярные бренды