manualshive.com logo in svg

ZyXEL Communications VMG1312-T10C, Руководство пользователя

ZyXEL Communications VMG1312-T10C - маршрутизатор с инструкцией по эксплуатации. Скачайте бесплатно руководство пользователя с manualshive.com. Простой и надежный маршрутизатор для вашей домашней сети.

Поделиться
Скачать
background image

VMG1312-T10C User’s Guide

235

A

P P E N D I X

      B

Legal Information

Copyright

Copyright © 2014 by ZyXEL Communications Corporation.
The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into 

any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or 

otherwise, without the prior written permission of ZyXEL Communications Corporation.
Published by ZyXEL Communications Corporation. All rights reserved.

Disclaimer

ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it 

convey any license under its patent rights nor the patent rights of others. ZyXEL further reserves the right to make changes in any 

products described herein without notice. This publication is subject to change without notice.
Your use of the Device is subject to the terms and conditions of any related service providers.  

Trademarks

ZyNOS (ZyXEL Network Operating System) is a registered trademark of ZyXEL Communications, Inc. Other trademarks mentioned in this 

publication are used for identification purposes only and may be properties of their respective owners. 
Trademarks mentioned in this publication are used for identification purposes only and may be properties of their respective owners. 

Certifications  

Federal Communications Commission (FCC) Interference Statement 

The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.

• This device must accept any interference received, including interference that may cause undesired operations.
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These 

limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, 

and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this device does cause harmful interference to radio/television reception, which can be determined by turning the device off and on, the 

user is encouraged to try to correct the interference by one or more of the following measures:

1

Reorient or relocate the receiving antenna.

2

Increase the separation between the equipment and the receiver.

3

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4

Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority 

to operate this equipment.

FCC Radiation Exposure Statement 

• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 

• IEEE 802.11b, 802.11g or 802.11n (20MHz) operation of this product in the U.S.A. is firmware-limited to channels 1 through 11.  IEEE 

802.11n (40MHz) operation of this product in the U.S.A. is firmware-limited to channels 3 through 9. 

• IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11.

 

• To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the 

antenna of this device and all persons. 

IC Radiation Exposure Statement 

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific 

operating instructions for satisfying RF exposure compliance.

Notices 

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the 

equipment.
This device is designed for the WLAN 2.4 GHz and/or 5 GHz networks throughout the EC region and Switzerland, with restrictions in 

France.
Ce produit est conçu pour les bandes de fréquences 2,4 GHz et/ou 5 GHz conformément à la législation Européenne. En France 

métropolitaine, suivant les décisions n°03-908 et 03-909 de l’ARCEP, la puissance d’émission ne devra pas dépasser 10 mW (10 dB) dans 

le cadre d’une installation WiFi en extérieur pour les fréquences comprises entre 2454 MHz et 2483,5 MHz. 

Содержание VMG1312-T10C















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для VMG1312-T10C

D2D FLEX 3000 Setup Manual preview
FLEX 3000
Бренд: D2D Страницы: 37
HMS INKNXMIT015C000 User Manual preview
INKNXMIT015C000
Бренд: HMS Страницы: 32
Ubee UBC1329AA00 User Manual preview
UBC1329AA00
Бренд: Ubee Страницы: 103
D-Link DI-707 Quick Installation Manual preview
DI-707
Бренд: D-Link Страницы: 7
D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway Quick Installation Manual preview
DPG-2000W - AirPlus G Wireless Presentation Gateway
Бренд: D-Link Страницы: 12
D-Link DVG-2004S Quick User Manual preview
DVG-2004S
Бренд: D-Link Страницы: 37
D-Link DSA 5100 - Airspot - Gateway Installation Manual preview
DSA 5100 - Airspot - Gateway
Бренд: D-Link Страницы: 28
D-Link DIV-140 Quick Installation Manual preview
DIV-140
Бренд: D-Link Страницы: 12
D-Link DI-701 iShare Technical Manual preview
DI-701 iShare
Бренд: D-Link Страницы: 50
D-Link DSL-604+ User Manual preview
DSL-604+
Бренд: D-Link Страницы: 67
D-Link DHM-301T User Manual preview
DHM-301T
Бренд: D-Link Страницы: 17
D-Link DVG-2004S Quick Installation Manual preview
DVG-2004S
Бренд: D-Link Страницы: 13
D-Link DI-707 Specifications preview
DI-707
Бренд: D-Link Страницы: 2
D-Link DI-704 User Manual preview
DI-704
Бренд: D-Link Страницы: 37
D-Link DPN-124G Quick Installation Manual preview
DPN-124G
Бренд: D-Link Страницы: 42
D-Link DG-104SH Manual preview
DG-104SH
Бренд: D-Link Страницы: 83
D-Link DSH-G300 Manual preview
DSH-G300
Бренд: D-Link Страницы: 12
D-Link DPN-144DG Quick Installation Manual preview
DPN-144DG
Бренд: D-Link Страницы: 42

Бренды по названию

Популярные бренды

Загрузить еще бренды