19
Static DNS 2
The static DNS 2 offered by the ISP.
MTU
Maximum Transmission Unit
5.1.3
PPPoE (connected by username/password)
If your ISP provides the username and password, please enter the information accordingly.
WAN
Select Enable/Disable to enable/disable WAN
Connection Type
PPPoE
Authentication
The authentication type CHAP or PAP offered by your ISP.
User Name
The user name offered by the ISP.
Password
The password offered by the ISP.
PPP Connection Type
Always Connected will maintain the PPPoE dial up connection. On Demand will
connect only when there is traffic.
Max Idle Time
PPPoE On Demand will only be activated when there is traffic. When there is no
traffic within the max idle time (default: 300 seconds), the PPPoE connection will be
disconnected.
PPP Echo Interval
PPPoE echo will ensure whether the link is still up or not (default interval 20
seconds)
PPP Retry Threshold
When PPPoE echo retry exceeds PPPoE Retry Threshold (default 20 times), the
dial up connection would be recognized as down.
PPP MTU
PPPoE maximum transmission unit: up to 1492
bytes (PPPoE‘s header is 8
bytes)(This value should be less than MTU value at least 8 bytes ).
MTU
Physical Device Maximum Transmission Unit
Provided by
your ISP
Содержание VFG6005
