ZyXEL Communications V660, Поддержка заметок

Страница: 7 / 22

V660 Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
7
Select the AP you intend to connect then click [New]. If the phone
successfully associates with the AP, a new connection profile will be created
using the SSID as the profile’s name.
If this is the first WLAN connection profile created, the phone will connect
the AP and try to obtain an IP address. When the phone successfully
associate with the AP, “online” will be displayed to the right to the
connection profile and the icon on top of the screen will be displayed (with
dotted-line for the circle and 3 dots to the right of the icon ) . When the IP
address is obtained, the icon will be changed to what is displayed in Fig. 2 of
this section (with solid-line for the circle and 3 dots to the right of the icon
disappear)
For un-secured AP, the above steps will make phone connect to the WLAN.
If further configuration is necessary, choose the connection profile and
press the joy-sticker.
Figure1 Figure2
In the connection setting window, you can change several parameters of the
profile, including the AP, the security setting for the AP. You also can view
the current IP address, default gateway, DNS information etc. [ to change the
current AP in the profile, select the ESSID field by moving the joy-sticker,
press the joy-sticker, and the scan-AP screen will be displayed. After 3
seconds, the results will be displayed. Choose the new AP and press Done]