ZyXEL Communications V660, Поддержка заметок

Страница: 10 / 22

V660 Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
10
Create a new profile (or enter the existing ones), then select the WPA
in "AP setting/Security", PEAP in "AP setting/EAP method".
2) Input the username/password for WPA PEAP you got from the network
administrator.
3) Press done to finish the WPA PEAP configurations if you have
finished other settings relevant to IP and etc.
6. WEP setting
1) Enter the WIFI profile setting (Choose Settings/WIFI/Connections).
Create a new profile (or enter the existing ones), then select the WEP
in "AP setting/Security"
2) Select ‘Open’ or ‘Shared’ for Authentication type in accordance with
your WIFI network setting.
3) Select ‘ASCII’ or ‘HEX’ for ‘WEP key format’ in accordance with your
WIFI network setting.
4) Input the password into the ‘WEP key’ blank. You can get this
password from your network administrator.
5) Press done to finish the WEP configurations if you have finished other
settings relevant to IP and etc.
SIP Phone Setting
In the SIP Phone configuration screen, follow the instruction shown on the
screen. Click [New] to create a new SIP account profile. Fill in the
information as shown in the different screens.
Figure1 Figure2 Figure3