ZyXEL Communications V500-T1, Руководство пользователя

Страница: 40 / 294

Chapter 2 Hardware
V500 Series User’s Guide
40
2.2.1 The LCD Screen
When the V500 is on, the LCD (Liquid Crystal Display) screen shows either the status screen,
a phonebook screen, or a configuration menu.
The LCD menus allow you to configure and control the V500. See Chapter 4 on page 61 for
details on configuring the V500 via the LCD menus.
2.2.2 Resetting the V500
If you want to reset the V500 to its factory defaults (if you forgot the web configurator
password, for example) press and hold the
RESET button for approximately ten seconds. The
V500 restarts automatically.
"
If you reset the V500, all settings return to their factory defaults. All data stored
in the V500 (phonebook entries, for example) will be lost.
2.3 Phone Functions
This section describes how to use your V500’s basic telephone functions. See Chapter 4 on
page 61 for information on the using the V500’s LCD screen menus and Chapter 5 on page 69
for information on how to use the V500’s phonebook.
2.3.1 Making a Call
1
Start the call:
• If you want to use the handset:
Lift the handset.
• If you want to use the speakerphone:
There are several ways to initiate a call using the speakerphone. Either
press the
SPEAKER key, press an Account key or press a Line key.
6 Reset button Use this to return the V500 to its factory default settings. See
the appendix on product specifications for the default settings.
Note: If you do this, all configuration changes and
data on the V500 are lost, including
phonebook records.
7 Handset port Use this to attach the included handset cable’s RJ-11
connector.
8 Cable channels Clip the V500’s power, handset and WAN / LAN cables into
these.
Table 4 Rear Panel Hardware
LABEL DESCRIPTION