ZyXEL Communications Unified Security Gateway ZyWALL 300 Скачать руководство пользователя страница 418

Страница: 418 / 1156

Chapter 18 DDNS

ZyWALL USG 300 User’s Guide

418

IP Address

The options available in this field vary by DDNS provider.

Interface

-The ZyWALL uses the IP address of the specified interface.

This option appears when you select a specific interface in the

Backup

Binding Address Interface

field.

Auto

-The DDNS server checks the source IP address of the packets

from the ZyWALL for the IP address to use for the domain name. You

may want to use this if there are one or more NAT routers between the

ZyWALL and the DDNS server.

Note: The ZyWALL may not determine the proper IP address if

there is an HTTP proxy server between the ZyWALL and the
DDNS server.

Custom

- If you have a static IP address, you can select this to use it for

the domain name. The ZyWALL still sends the static IP address to the

DDNS server.

Custom IP

This field is only available when the

IP Address

Custom

. Type the IP

address to use for the domain name.

Enable

Wildcard

This option is only available with a DynDNS account.

Enable the wildcard feature to alias subdomains to be aliased to the

same IP address as your (dynamic) domain name. This feature is useful

if you want to be able to use, for example,

www.yourhost.dyndns.org

and still reach your hostname.

Mail Exchanger This option is only available with a DynDNS account.

DynDNS can route e-mail for your domain name to a mail server (called

a mail exchanger). For example, DynDNS routes e-mail for

john-

[email protected]

to the host record specified as the mail

exchanger.

If you are using this service, type the host record of your mail server

here. Otherwise leave the field blank.

See

www.dyndns.org

for more information about mail exchangers.

Backup Mail

Exchanger

This option is only available with a DynDNS account.

Select this check box if you are using DynDNS’s backup service for e-

mail. With this service, DynDNS holds onto your e-mail if your mail

server is not available. Once your mail server is available again, the

DynDNS server delivers the mail to you. See www.dyndns.org for more

information about this service.

Click

to save your changes back to the ZyWALL.

Cancel

Click

Cancel

to exit this screen without saving.

Table 106

Configuration > Network > DDNS > Add (continued)

LABEL

DESCRIPTION

Содержание Unified Security Gateway ZyWALL 300





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Unified Security Gateway ZyWALL 300

Отзывы:

Похожие инструкции для Unified Security Gateway ZyWALL 300

Бренды по названию

Популярные бренды

ZyXEL Communications Unified Security Gateway ZyWALL 300, Руководство пользователя

Результаты поиска

Содержание Unified Security Gateway ZyWALL 300

Отзывы:

Похожие инструкции для Unified Security Gateway ZyWALL 300

Бренды по названию

Популярные бренды