ZyXEL Communications Unified Security Gateway ZyWALL 300, Руководство пользователя

Страница: 331 / 1156

Chapter 13 Interfaces
ZyWALL USG 300 User’s Guide
331
The following table describes the general wireless LAN labels in this screen.
Table 71 Configuration > Network > Interface > WLAN > Add (No Security)
LABEL DESCRIPTION
Show Advance
Settings / Hide
Advance Settings
Click this button to display a greater or lesser number of configuration
fields.
General Settings
Enable
Interface
Select this option to turn on the wireless LAN interface.
Interface
Name
When you are adding a wireless LAN interface, edit the last number
(using 1~8) of the name for this wireless LAN interface.
Description Enter a description of this interface. It is not used elsewhere. You can
use alphanumeric and
()+/:=?!*#@$_%-
characters, and it can be
up to 60 characters long.
Zone Select the zone to which you want the WLAN interface to belong.
Virtual Access
Point Settings
SSID (Service Set IDentity) The SSID identifies the Service Set with which a
wireless station is associated. Wireless stations associating to the
access point (AP) must have the same SSID. Enter a descriptive name
(up to 32 printable 7-bit ASCII characters) for the wireless LAN. To
make your wireless network more secure, change the default SSID to
something that is difficult to guess.
Hide SSID
Broadcast
Select to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning.
Block Intra
BSS Traffic
Select this to prevent wireless clients in this profile’s BSS from
communicating with one another.
Maximum
Associations
Specify the highest number of wireless clients that are allowed to
connect to the wireless interface at the same time.
WLAN Security
Settings
Security Type Use this field to select the type of security to use for this wireless LAN
interface. Select
none
to not use any security. See the following
sections for details on the other security types.
802.1x Authentication server (IEEE 802.1x) settings are available when you
use no security or WEP security and click
Advanced
.
Select the check box to enable wireless user authentication through an
external authentication server.
Radius Server
IP Address
Enter the IP address of the external authentication server in dotted
decimal notation.
Radius Server
Port
Enter the RADIUS server’s listening port number (the default is
1812
).
Radius Server
Secret
Enter a password (up to 31 alphanumeric characters) as the key to be
shared between the external authentication server and the ZyWALL.
The key is not sent over the network. This key must be the same on
the external authentication server and ZyWALL.
IP Address
Assignment