3
more than 40 feet (12 meters) long.
6. Install a detector inside every room where one sleeps with the door partly or
completely closed, since smoke could be blocked by the closed door and a
hallway alarm may not wake up the sleeper if the door is closed.
7. Install detectors as close to the center of the ceiling as possible. If this is
not practical, put the detector on the ceiling, no closer than 4 inches (10 cm)
from any wall or corner as shown in FIGURE 4.
8. If ceiling mounting is not possible, put wall-mounted detectors between 4
and 6 inches (10~15 cm) from the ceiling (FIGURE 4).
9. If some of your rooms have sloped, peaked, or gabled ceilings, try to mount
detectors 3 feet (0.9 meter) measured horizontally from the highest point of
the ceiling as shown in FIGURE 5.
Locations Not To Install the Detector
Nuisance alarms take place when smoke detectors are installed where they will
not work properly. To avoid nuisance alarms, do not install smoke detectors in
the following situations:
1. Combustion particles are the by-products of something that is burning.
Thus, in or near areas where combustion particles are present you do not
install the smoke detectors to avoid nuisance alarms, such as kitchens with
few windows or poor ventilation, garages where there may be vehicle
exhaust, near furnaces, hot water heaters, and space heaters.
2. Do not install smoke detectors less than 20 feet (6 meters) away from places
where combustion particles are normally present, like kitchens. If a 20-foot
distance is not possible, e.g. in a mobile home, try to install the detector as
far away from the combustion particles as possible, preferably on the wall.
To prevent nuisance alarms, provide good ventilation in such places.
IMPORTANT
: For any reason, do not disable the detector to avoid nuisance
alarms.
3. When air streams passing by kitchens, the way how a detector can sense
combustion particles in normal air-flow paths is graphically shown in
FIGURE 6, which indicates the correct and incorrect smoke detector
locations concerning this problem.
4. In damp or very humid areas, or near bathrooms with showers. Moisture in
humid air can enter the sensing chamber, then turns into droplets upon
cooling, which can cause nuisance alarms. Install detectors at least 10 feet
(3 meters) away from bathrooms.
5. In very cold or very hot areas, including unheated buildings or outdoor
rooms. If the temperature goes above or below the operating range of
smoke detector, it will not work properly. The temperature range for your
smoke detector is 4
°
C to 38
°
C (40
°
F to 100
°
F).
6. In very dusty or dirty areas, dirt and dust can build up on the detector
’s
sensing chamber, to make it overly sensitive. Additionally, dust or dirt can
FIGURE 4
Recommended best and
acceptable locations to
mount smoke detectors.
FIGURE 5
Recommended location to
mount smoke detectors in
rooms with sloped, gabled
or peaked ceiling.
FIGURE 6
Recommended smoke detector locations
to avoid air streams with combustion
particles.
