ZyXEL Communications Prestige 650H-17, Руководство пользователя, Страница: 95 / 200

Prestige 650H-17 ADSL Router
NAT 7-7
Step 2.
Move the cursor to the Edit IP/Bridge field, press
[SPACE BAR]
to select
Yes
and then press
[ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options.
Figure 7-4 Menu 11.3 – Applying NAT to the Remote Node
The following table describes the options for Network Address Translation.
Table 7-3 Applying NAT in Menus 4 & 11.3
FIELD DESCRIPTION EXAMPLE
Press [SPACE BAR] and then [ENTER] to select Full Feature if you
have multiple public WAN IP addresses for your Prestige. The SMT
uses the address mapping set that you configure and enter in the
Address Mapping Set field (menu 15.1 - see section 7.3.1 ).
Full Feature
Select None to disable NAT. None
NAT
When you select SUA Only , the SMT uses Address Mapping Set 255
(menu 15.1 - see section 7.3.1 ). Choose SUA Only if you have just
one public WAN IP address for your Prestige.
SUA Only
7.3 NAT Setup
Use the Address Mapping Sets menus and submenus to create the mapping table used to assign global
addresses to computers on the LAN. You can see two NAT Address Mapping sets in menu 15.1. You can
only configure
Set 1 . Set 255 is used for SUA. When you select
Full Feature
in menu 4 or 11.3, the
Menu 11.3 - Remote Node Network Layer Options
IP Options: Bridge Options:
IP Address Assignment= Static Ethernet Addr Timeout (min)= 0
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= Full Feature
Address Mapping Set= 2
Metric= 2
Private= No
RIP Direction= Both
Version= RIP-2B
Multicast= IGMP-v2
IP Policies=
Press ENTER to Confirm or ESC to Cancel: