ZyXEL Communications Prestige 650H-17, Руководство пользователя, Страница: 59 / 200

Prestige 650H-17 ADSL Router
Internet Access 3-13
3.12.2 Using RFC 1483 Encapsulation
In this case the IP Address Assignment must be static with the same requirements for the IP Address and
ENET ENCAP Gateway fields as stated above.
3.12.3 Using ENET ENCAP Encapsulation
In this case you can have either a static or dynamic IP. For a static IP you must fill in all the IP Address and
ENET ENCAP Gateway fields as supplied by your ISP. However for a dynamic IP, the Prestige acts as a
DHCP client on the WAN port and so the IP Address and ENET ENCAP Gateway fields are not applicable
(N/A) as they are assigned to the Prestige by the DHCP server.
3.13 Internet Access Configuration
Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually a simplified
setup for one of the remote nodes that you can access in menu 11. Before you configure your Prestige for
Internet access, you need to collect your Internet account information from your ISP and telephone
company.
Use the following table to record your Internet Account Information. Note that if you are using PPPoA or
PPPoE encapsulation, then the only ISP information you need is a login name and password. You only need
to know the Ethernet Encapsulation Gateway IP address if you are using ENET ENCAP encapsulation.
Table 3-4 Internet Account Information
FIELD DESCRIPTION YOUR INFO
System Name Name of the Prestige (optional).
Service Name
(PPPoE
Encapsulation) Enter the PPPoE service name if the ISP supplies one.
Enter “any” if the ISP does not assign you one.
Encapsulation PPPoE , RFC1483 , PPPoA or ENET ENCAP .
Multiplexing
LLC-based or VC-based . If this information is not
given, use the default.
VPI Enter your Virtual Path Identifier here.
VCI Enter your Virtual Channel Identifier here.
My Login Enter the login name assigned by your ISP (for
PPPoA/PPPoE only).
My Password Enter the password associated with your ISP assigned
My Login (for PPPoA/PPPoE only).