ZyXEL Communications Prestige 645R, Руководство пользователя

Страница: 80 / 180

Prestige P645 ADSL Internet Access Router
5-10 Remote Node TCP/IP Configuration
Figure 5-10 Menu 12.1.1 - Edit IP Static Route
The following table describes the fields for Menu 12.1.1 – Edit IP Static Route Setup .
Table 5-3 Edit IP Static Route Menu Fields
FIELD DESCRIPTION
Route Name Enter a descriptive name for this route. This is for identification purposes only.
Active Use the [SPACE BAR] to select Yes to activate or No to deactivate this static route.
Destination IP
Address This parameter specifies the IP network address of the final destination. Routing is
always based on network number. If you need to specify a route to a single host, use
a subnet mask of 255.255.255.255 in the subnet mask field to force the network
number to be identical to the host ID.
IP Subnet Mask Enter the subnet mask for this destination.
Gateway IP
Address Enter the IP address of the gateway. The gateway is an immediate neighbor of your
Prestige that will forward the packet to the destination. On the LAN, the gateway must
be a router on the same segment as your Prestige; over WAN, the gateway must be
the IP address of one of the remote nodes.
Metric The metric represents the “cost” of transmission for routing purposes. IP routing uses
hop count as the measurement of cost, with a minimum of 1 for directly connected
networks. Enter a number that approximates the cost for this link. The number need
not be precise, but it must be between 1 and 15. In practice, 2 or 3 is usually a good
number.
Private This parameter determines if the Prestige will include the route to this remote node in
its RIP broadcasts. If set to
Yes , this route is kept private and not included in RIP
broadcasts. If No , the route to this remote node will be propagated to other hosts
through RIP broadcasts.
Once you have completed filling in the Edit IP Static Route, press [ENTER] to return to menu 12.1. Press
[ENTER] at the message [Press ENTER to Confirm...] to save your configuration, or press [ESC] at any
time to cancel.
Menu 12.1.1 - Edit IP Static Route
Route #: 1
Route Name= Tokyo
Active= No
Destination IP Address= ?
IP Subnet Mask= ?
Gateway IP Address= ?
Metric= 2
Private= No
Press ENTER to Confirm or ESC to Cancel: