ZyXEL Communications Prestige 641, Руководство пользователя, Страница: 43 / 117

Prestige 641 ADSL Internet Access Router
Internet Access
3-9
Figure 3-4 Internet Access Setup
Table 3-4 Internet Access Setup Menu Fields
Field Description Options/E.G.
ISP’s Name
Enter the name of your Internet Service Provider, e.g.,
myISP. This information is for identification purposes only. e.g., MyISP
Encapsulation
Press the spacebar to select the method of encapsulation
used by your ISP. You must have a static IP address (see
below) for PPPoE, PPP, or RFC 1483 encapsulation. PPPoE, PPP,
RFC 1483 or
ENET ENCAP.
Multiplexing
Press the [Space Bar] to select the method of multiplexing
used by your ISP - either VC-based or LLC-based. VC-based
LLC-based
VPI #
Enter the Virtual Path Identifier (VPI) that the telephone
company gives you.
10
VCI #
Enter the Virtual Channel Identifier (VCI) that the telephone
company gives you. 10
My Login
Enter the login name that your ISP gives you. If you are
using PPPoE encapsulation, then this field must be of the
form
user@domain where domain identifies your ISP.
reds
My Password
Enter the password associated with the login name above. ***
Single User Account Press the spacebar to enable or disable SUA. Please see
the following section for a more detailed discussion on the
Single User Account feature. Yes
No
Menu 4 - Internet Access Setup
ISP's Name= aa
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 10
VCI #= 10
My Login= N/A
My Password= N/A
Single User Account= No
J IP Address Assignment= Static
IP Address= 192.168.1.100
IP Subnet Mask= 255.255.255.0
ENET ENCAP Gateway= N/A
Press ENTER to confirm or ESC to cancel:
Get this information
from the telephone
company. Get the
other information from
your ISP.