ZyXEL Communications Prestige 641 Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 117

ZyXEL Communications Prestige 641 Скачать руководство пользователя страница 101

Prestige 641 ADSL Internet Access Router

System Maintenance

10-9

Step 2.

From this menu, enter 4 to open Menu 24.4 - System Maintenance - Diagnostic.

The following table describes the diagnostic tests available in Menu 24.4 for your Prestige and the
connections.

Table 10-4 System Maintenance Menu Diagnostic

Field

Description

Reset ADSL

This command re-initializes the ADSL link to the telephone company.

Ping Host

This diagnostic test pings the host, which determines the functionality of the
TCP/IP protocol on both systems and the links in between.

Reboot System

This option reboots the Prestige.

Command Mode

This option allows you to enter the command mode. This mode allows you to
diagnose and test your Prestige using a specified set of commands.

10.4 Backup Configuration

Option 5 in Menu 24 - System Maintenance allows you to backupthe current Prestige configuration to
your workstation. Backup is highly recommended once your Prestige is functioning properly.

You must perform the backup and restore through the console port. Any serial communications program
should work fine; however, you must use XMODEM protocol to perform the download/upload.

Please note that terms “download” and “upload” are relative to the workstation. Download means to
transfer from another machine to the workstation, while upload means from your workstation to another
machine.

10.5 Restore Configuration

Selecting option 6 from Menu 24 - System Maintenance to restore the configuration from your
workstation to the Prestige. Again, you must use the console port and XMODEM protocol to restore the
configuration.

Keep in mind that the configuration is stored in the flash ROM in the Prestige, so even if power failure
should occur, your configuration is safe.

10.6 Firmware Update

Menu 24.7 -- System Maintenance - Upload Firmware allows you to upgrade the firmware and the
configuration file via the console port. Note that this function erases the old data before installing the new
one; please do not attempt to update unless you have the new firmware at hand. There are 2 components in
the system: the router firmware and the configuration file, as shown below.

«
...
99
100
101
102
103
...
»

Содержание Prestige 641






















































































































Отзывы:

Нет отзывов