Prestige 623R-T ADSL Dual-link Router
4
PORT
CONNECTION
USB
The USB port is useful if you have a USB-enabled computer that
does not have a network interface card for attaching to your Ethernet
network. Refer to the
Installing the USB Driver
section.
RESET
You only need to use this button if you’ve forgotten the Prestige’s
password. It returns the Prestige to the factory defaults (password is
1234, LAN IP address 192.168.1.1 etc. see your
User’s Guide
for
details).
Front Panel LEDs
When the Prestige is turned on, the
PWR
LED turns on. The
SYS
and
USB
LEDs blink
while performing system testing. The
SYS
LED then turns steady on if the testing is
successful. The appropriate
LAN
and/or
USB
LEDs turn on if they are properly
connected.
Prestige Factory Defaults
This
Quick Start Guide
provides a basic configuration that should be compatible with
your home or small office network setup. Refer to the
User’s Guide
for additional
configuration instructions.
PRESTIGE FACTORY DEFAULTS
USB/LAN IP Address 192.168.1.1
Default User name
admin
Subnet Mask
255.255.255.0
Default Password
1234
DHCP IP Pool
192.168.1.33 – 192.168.1.64
