Figure 1 Diagram of Right and Rear Panel of the Prestige
Connecting the Power Adapter
Plug a 16VAC 1200mA power adapter into the outlet on
the rear panel of the Prestige labeled ‘POWER’.
Configuring Your Prestige
After you have successfully connected your Prestige, you
can use your computer’s communications software to
configure your unit. Simply select the COM port to which
your Prestige is connected and turn the power on. After
the initial data, you will be asked to enter the password.
Enter the default password of “1234” and press enter.
This will automatically send you to the SMT (System
Management Terminal) which will be used to configure
the Prestige.
Fill in the fields as described in the following sections. It
is important to note that this set of configuration
instructions provides the minimum fields you need to set
in order to connect to the Internet.
