ZyXEL Communications PMG1006-B20A, Руководство пользователя

Страница: 17 / 34

PMG1006-B20A User’s Guide
17
C
H A P T E R
5
Maintenance
5.1 Overview
• Use the SLID screen (see Section 5.2 on page 17 ) to change your GPON Device’s Subscriber
Location ID (SLID) setting.
• Use the General screen (see Section 5.3 on page 18 ) to configure your GPON Device’s name,
management inactivity timeout, and password.
• Use the Transceiver screen (see Section 5.4 on page 19 ) to view current status information for
the GPON Device’s optical transceiver and configure transceiver alarm thresholds.
• Use the Logs screens (see Section 5.5 on page 20 and Section 5.6 on page 21 ) to display your
GPON Device’s logs and select which logs to record.
• Use the Tools screens (see Section 5.7 on page 22 through Section 5.10 on page 25 ) to upload
new firmware, manage configuration files and restart your GPON Device.
5.2 SLID
To change your GPON Device’s Subscriber Location ID (SLID) setting, click Maintenance > SLID.
The screen appears as shown. The SLID identifies your device to the GPON service provider’s
Optical Line Terminal (OLT). If your GPON service provider gave you an SLID to use, enter it in this
screen.
Figure 9
Maintenance > SLID