PMG1006-B20A User’s Guide
15
C
H A P T E R
4
LAN
4.1 Overview
This chapter describes how to configure LAN settings.
A Local Area Network (LAN) is a shared communication system to which many computers are
attached. A LAN is a computer network limited to the immediate area, usually the same building or
floor of a building.
4.2 IP
Click Network > LAN to open the IP screen. Use this screen to set the Local Area Network IP
address and subnet mask of your GPON Device.
Figure 8
Network > LAN > IP
The following table describes the fields in this screen.
Table 4
Network > LAN > IP
LABEL
DESCRIPTION
IP Address
Enter the LAN IP address you want to assign to your GPON Device in dotted decimal
notation, for example, 192.168.1.1 (factory default).
IP Subnet Mask
Type the subnet mask of your network in dotted decimal notation, for example
255.255.255.0 (factory default). Your GPON Device automatically computes the
subnet mask based on the IP address you enter, so do not change this field unless you
are instructed to do so.
Apply
Click Apply to save your changes back to the GPON Device.
Cancel
Click Cancel to begin configuring this screen afresh.
