ZyXEL Communications PLA4225 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 60

background image

Chapter 6 LEDs and Troubleshooting

PLA4225 User’s Guide

49

3

Disconnect and re-connect the power cord to the PLA4225.

4

Remove the powerline adapter from the outlet. Then connect an electrical device that you know
works into the same power outlet. This checks the status of the power outlet.

5

If the problem continues, contact the vendor.

None of the ETHERNET lights turn on.

1

Check the hardware connections. See the Quick Start Guide.

2

Inspect your cables for damage. Contact the vendor to replace any damaged cables.

3

Check the Ethernet adapter on your computer and make sure it’s enabled and working properly.

4

If the PLA4225 is connected to an Ethernet switch or router, make sure the device is working
correctly, and that the LAN network is working and configured correctly as well.

The HomePlug light does not turn on.

1

Check all PLA4225s on your network have the latest firmware installed. PLA4225s with the latest
firmware cannot communicate with PLA4225s using earlier versions of the firmware. Go to

for instructions on installing the latest firmware.

2

Use the PLA42xx Series Configuration Utility to detect all other HomePlug devices on your
powerline network. Make sure that the network name (sometimes called the network password) is
the same on all of your powerline adapters. See

Section 4.3 on page 27

for instructions on checking

the network name.

3

Check the DAK password and MAC address for all powerline adapters are typed correctly in the
utility. See

Section 4.3 on page 27

for instructions on checking the DAK and MAC address.

4

Make sure that all your powerline adapters are HomePlug AV compliant. Check the package it came
in or ask your vendor. This PLA4225 can not detect earlier versions of HomePlug powerline adapters
such as HomePlug 1.0 or 1.0.1. (Although they can coexist on the same electrical wiring without
interfering with each other.)

5

Make sure that the powerline adapters on your network are all on the same electrical wiring.
Connect another powerline adapter into an outlet close to your PLA4225’s power outlet. They are
probably now on the same electrical wiring. Check the HomePlug

light. If it now lights up your

powerline adapter was probably previously on separate electrical wiring. Ask an electrician for more
information on the electrical wiring in your building.

6

If your powerline network is using coaxial cable, check all powerline adapters are on the same
coaxial cable.

7

If your powerline network is using electrical wiring (not coaxial cable), check you do not have a
power meter between powerline adapters. Powerline signals cannot pass this.

«
...
47
48
49
50
51
...
»

Содержание PLA4225





























































Отзывы:

Нет отзывов

Похожие инструкции для PLA4225

Бренд: Keithley Страницы: 434

Бренд: Talkswitch Страницы: 17

Бренд: FELA Страницы: 13

PU-8H8HBTPL-4K22

Бренд: CYP Страницы: 24

S3100-SI Series

Бренд: H3C Страницы: 58

Бренд: Grizzly Страницы: 2

Бренд: Cable Electronics Страницы: 16

Бренд: cable matters Страницы: 8

Бренд: IDT Страницы: 158

Бренд: LEGRAND Страницы: 197

Бренд: Valcom Страницы: 1

ENTERTAINMENT HUB

Бренд: Ev-ent Hire Страницы: 5

Бренд: Exsys Страницы: 16

Бренд: Abtus Страницы: 2

Бренд: Lutron Electronics Страницы: 2

TES-W9124GT-M12X-BP2-24V-IP54

Бренд: ORiNG Страницы: 2

Бренд: Paralan Страницы: 45

Бренд: Lanpro Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды