4
1. DSL
: Use the provided telephone cable to connect the P-792H v2’s
DSL port to a telephone jack.
2. ETHERNET
: Use an Ethernet cable to connect a computer to the
ETHERNET
port for initial configuration and/or Internet access.
3. POWER
: Use the power adaptor provided with your P-792H v2 to
connect an appropriate power source to the
POWER
socket. Make
sure the power source is on.
4.
Push in the
POWER
button. Look at the lights on the front panel.
• The
POWER
light blinks while your P-792H v2 starts up and stays
on once it is ready. The
DSL
LED blinks while the P-792H v2 is
trying to establish a connection with the ISP and stay on when the
connection is established. The
INTERNET
light is on when you are
able to access the Internet and blinks when the P-792H v2 is
sending or receiving data.
• The
ETHERNET
light stays on if the
ETHERNET
port is properly
connected and blinks when there is traffic.
If any of these lights are not on, check your connections, and inspect
your cables for damage. If the lights are still off, contact your local
vendor.
