P-661HNU Series Support Notes
7
All contents copyright © 2010 ZyXEL Communications Corporation.
b. Press the
RESET
button for longer than one second and shorter than
five seconds and release it.
c. Press the
RESET
button for six seconds and then release it. If the
POWER
LED begins to blink, the default configuration has been
restored and the P-661HNU-Fx restarts.
6. Is it possible to access a server running behind SUA from the outside
Internet? How can I do it?
Yes, it is possible because P-661HNU-Fx delivers the packet to the local
server by looking up to a SUA server table. Therefore, to make a local server
accessible to the outside users, the port number and the inside IP address of
the server must be configured. (You can configure it in Web Configurator,
Advanced Setup,
Network Setting -> NAT -> Port Forwarding
.
7. Is there any troubleshooting method on ZLD platform?
You could mirror WAN packet to LAN host
Telnet into the device, triggle command
„/var/trafficmirror.sh nas 1 192.168.1.x‟
Note: It is protected by super username & password,
„root/1234‟ by
factory default.
Make sure your PC which is used to capture WAN packets has been set with a
static ip 192.168.1.x in case the PC will be allocated another IP after DHCP
lease time.
