P-661H-D Series Support Notes
Most of the cases, static IP addresses are used for VPN tunneling endpoints.
But for SOHO users, generally, it is a dynamic case. In this case, this IP will
not be available to be predefined in the VPN box. There are some tips when
configure Prestige in any dynamic case.
•
Prestige static WAN IP v.s. peer side dynamic IP
We need to note:
(1) In VPN settings of Prestige, please specify the IP address of
Secure
Gateway
as
0.0.0.0
(2) The VPN connection can
ONLY
be initiated from dynamic side to static side
in order to update its dynamic IP to the static side.
(3) In peer side,
are you using
Win2K built-in IPSec
?
In this case, W2K won't
capture the dynamic IP address automatically for you. You have to obtain your
dynamic IP address and then go back to IPSec configuration to setup your
current IP address.
•
Prestige dynamic WAN IP v.s. peer side static IP
We need to note:
(1) In VPN settings of Prestige, please specify the IP address of
My IP
as
0.0.0.0
. Prestige will automatically bind it's current WAN IP address to IPSec.
(2) IPSec tunnel in this case, can
ONLY
be initiated from Prestige.
(3) In peer side,
are you using
SonicWALL, NetScreen?
SonicWALL requires
you to enter an ID (in FQDN format) to identify Prestige.
•
Prestige dynamic WAN IP v.s. peer side dynamic IP
In this case, we need to use DDNS (Dynamic Domain Name Service). There
are many different solutions for it:
(1) Prestige v.s. Prestige
Solution 1:
94
All contents copyright © 2006 ZyXEL Communications Corporation.
