P-661H-D Series Support Notes
Product FAQ
1. How can I manage P-661H-D?
Multilingual Embedded Web GUI for Local and Remote management
CLI (Command-line interface)
Telnet support (Administrator Password Protected ) for remote
configuration change and status monitoring
FTP/ TFTP sever, firmware upgrade and configuration backup and
restore are supported(Administrator Password Protected)
2. What is the default password for Web Configurator?
There are two different accounts for P-661H-D Web Configurator:
Common
User Account
and
Administrator Account.
By factory default the password for the two accounts are:
•
Common User Account:
user
•
Administrator
Account:
1234
.
You can change the password after you logging in the Web Configurator.
Please record your new password whenever you change it. The system
will lock you out if you have forgotten your password.
3. What’s the difference between ‘Common User Account’ and
‘Administrator Account’?
For Common User Account, it can only access the status monitor of P-661H-D
and check the current system status.
For Administrator Account, besides accessing the status monitor of P-661H-D,
it can also access Winzard setup/ Advanced setup of P-661H-D:
Moreover, only with Administrator Password, you could manage the P-661H-D
via FTP/TFTP or Telnet.
4. How do I know the P-661H-D's WAN IP address assigned by the ISP?
You can view
"My WAN IP <from ISP> : x.x.x.x"
shown
in Web Configurator
‘Status->Device Information ->WAN Information’ to check this IP address.
5. What is the micro filter or splitter used for
?
Generally, the voice band uses the lower frequency ranging from 0 to 4KHz,
while ADSL data transmission uses the higher frequency. The micro filter acts
as a low-pass filter for your telephone set to ensure that ADSL transmissions
11
All contents copyright © 2006 ZyXEL Communications Corporation.
