P-660HWP-Dx Support Notes
All contents copyright © 2007 ZyXEL Communications Corporation.
28
13. What are the default ACL firewall rules in P-660HWP-Dx?
There are two default ACLs pre-configured in the P-660HWP-Dx, one allows
all connections from LAN to WAN and the other blocks all connections from
WAN to LAN except of the DHCP packets.
Configuration
1. How do I configure the firewall?
You can use the Web Configurator to configure the firewall for P-660HWP-Dx.
By factory default, if you connect your PC to the LAN Interface of
P-660HWP-Dx, you can access Web Configurator via
„http: //192.168.1.1‟.
Note: Don
’t forget to type in the Administrator Password.
2. How do I prevent others from configuring my firewall?
There are several ways to protect others from touching the settings of your
firewall.
1. Change the default Administrator password since it is required when
setting up the firewall.
2. Limit who can access to your P-660HWP-Dx
‟s Web Configurator or CLI.
You can enter the IP address of the secured LAN host in Web
Configurator, Advanced Setup,
Advanced -> Remote MGNT ->
[Service] ->Secured Client IP
to allow special access to your
P-660HWP-Dx:
The default value in this field is 0.0.0.0, which means you do not care which
host is trying to telnet your P-660HWP-Dx or access.the Web Configurator
of
