background image

                                         

P-660H-Tx v2 Support Notes

 

 

One rule configured for using 

Many-to-Many No Overload

 mapping type is 

shown below.    

We can also do this by configure three

One-to-One

 mapping type rules. 

6. Using the Dynamic DNS (DDNS)   

  What is DDNS?   

The DDNS service, an IP Registry provides a public central database where 
information such as email addresses, hostnames, IPs etc. can be stored and 
retrieved. This solves the problems if your DNS server uses an IP associated 
with dynamic IPs.   

Without DDNS, we always tell the users to use the WAN IP of the P-660H-Tx 
v2 to access the internal server. It is inconvenient for the users if this IP is 
dynamic. With DDNS supported by the P-660H-Tx v2, you apply a DNS name 
(e.g., www.zyxel.com.tw) for your server (e.g., Web server) from a DDNS 
server. The outside users can always access the web server using the 
www.zyxel.com.tw regardless of the WAN IP of the P-660H-Tx v2.   

                                     

53 

All contents copyright © 2006 ZyXEL Communications Corporation. 

 

Содержание P-660H-TX


























































































Отзывы: