ZyXEL Communications P-2802HWL-I3 Скачать руководство пользователя

Страница: 39 / 187

Prestige 2802HWL-Ix Support Notes

Using the Dynamic DNS (DDNS)

What is DDNS?

The DDNS service, an IP Registry provides a public central database where information such as email

addresses, hostnames, IPs etc. can be stored and retrieved. This solves the problems if your DNS server uses an

IP associated with dynamic IPs.

Without DDNS, we always tell the users to use the WAN IP of the Prestige to access the internal server. It is

inconvenient for the users if this IP is dynamic. With DDNS supported by the Prestige, you apply a DNS name

(e.g., www.zyxel.com.tw) for your server (e.g., Web server) from a DDNS server. The outside users can always

access the web server using the www.zyxel.com.tw regardless of the WAN IP of the Prestige.

When the ISP assigns the Prestige a new IP, the Prestige must inform the DDNS server the change of this IP so

that the server can update its IP-to-DNS entry. Once the IP-to-DNS table in the DDNS server is updated, the

DNS name for your web server (i.e., www.zyxel.com.tw) is still usable.

The DDNS server stores password-protected email addresses with IPs and hostnames and accepts queries based

on email addresses. So, there must be an email entry in the Prestige menu 1.

The DDNS servers the Prestige supports currently is

WWW.DYNDNS.ORG

where you apply the DNS from

and update the WAN IP to.

•

Setup the DDNS

•

Before configuring the DDNS settings in the Prestige, you must register an account from the

DDNS server such as

WWW.DYNDNS.ORG

first. After the registration, you have a hostname for

your internal server and a password using to update the IP to the DDNS server.

•

Go to

Advanced > Dynamic DNS

in WEB GUI and active

'Dynamic DNS'

checkbox and press

Apply

for configuring the settings of the DDNS.

Содержание P-2802HWL-I3




























































































































































































Результаты поиска

Содержание P-2802HWL-I3

Отзывы:

Похожие инструкции для P-2802HWL-I3

Бренды по названию

Популярные бренды

ZyXEL Communications P-2802HWL-I3, Поддержка заметок

Результаты поиска

Содержание P-2802HWL-I3

Отзывы:

Похожие инструкции для P-2802HWL-I3

Бренды по названию

Популярные бренды