P-2304R-P1 Series Quick Start Guide
3
2 Hardware Connections
1 PHONE 1-4
: Use a telephone cable (and any telephone adaptors provided with your P-2304R-P1) to
connect your telephones to these ports. If you only have one telephone, you should only use one port.
2 ETHERNET
: Use an Ethernet cable to connect your computer to this port.
3 WAN
: Use an Ethernet cable to connect your broadband modem or router to this port.
4 POWER
:
Use the power adaptor provided with your P-2304R-P1 to connect an appropriate power source
to this port.
On the front panel, the
POWER
light flashes green while your P-2304R-P1 starts up and stays green once it is
ready. The
WAN
and
ETHERNET
lights turn on if the
WAN
and
ETHERNET
ports are properly connected.
These lights flash when the P-2304R-P1 is sending or receiving data. The
INTERNET
light stays green when
you are able to access the Internet.
